CAD Audio CAD M179 Variable-Pattern Condenser Microphone (M179)
Onе-Dау Sаlе: Uр tо 80% оƒƒ CAD Audio CAD M179 Variable-Pattern Condenser Microphone (M179) Reviews
So you can check out the other reviews at Amazon.com
only with $ 199.99
| Brand | CAD Audio |
| Connectivity Technology | Wired |
| Audio Sensitivity | 143 dB |
| Item Weight | 4 Pounds |
| Polar Pattern | Multipattern |
| Material | Stainless Steel |
| Impedance | 200 Ohm |
| Number of Channels | 1 |
| Frequency Response | 20 KHz |
| Noise Level | 143 dB |
- Equitek large dual diaphragm capsule
- Infinitely adjustable polar pattern
- 20Hz to 20KHz frequency response; 36dBV (16 mV) @ 1 Pa sensitivity
- 200 Ohms impedance; 143dB (pad engaged) max SPL; 11dBA self noise
- 100Hz, 6dB/Oct Hi-Pass; 20dB Attenuator
From the manufacturer
CAD Audio
CAD Audio continues to build upon over 90 years of expertise and leadership in the professional audio industry, delivering innovative and real-world solutions to market segments such as Live Performance, Recording, Broadcast & Video Production, House of Worship, Commercial Audio, Consumer Electronics, PodCasting, Content Creation and IRL Streaming Production. Quality offerings at reasonable prices allow one and all the opportunity to enjoy professional results.
E300S
Large Diaphragm Multi-Pattern Condenser Microphone
Transparent, airy upper and mids, coupled with a rich, silky smooth low end and an enormous up-front presence make the E300S one of CAD Audio's finest vocal mics. The E300S offers unparalleled performance from critical studio tracking scenarios to live sound reinforcement.
The 1.1" gold-vapor deposited externally biased multi-pattern (cardioid, omni, figure-of-eight) dual diaphragm condenser capsule is hand dampened for consistent frequency response. A regulated bypass voltage generator for precise output sensitivity, sophisticated laser trimmed op-amp circuitry for increased management of fast transients and open capsule architecture design make the E300S a classic vocal studio microphone.
Features an on/off switch with auto power shut-off feature, hi-pass filter and 20dB pad. Shock mount and carrying case included.
E300S Specifications
- Operating Principle: Externally-Biased Condenser
- Polar Pattern: Cardioid, Figure-of-Eight, Omnidirectional
- Frequency Response: 20Hz -18KHz
- Sensitivity: - 34dBV (20mV) @ 1 Pa; Impedance: 220 Ohms
- Max SPL: 145dB (pad engaged); Self Noise: 12dBA
- High-Pass: 135Hz, 6dB/oct
- Attenuator: 20dB
- Power Requirements: P48, 8mA; RoHS Compliant
E100S
Supercardioid Condenser Microphone
Engineered and built in the USA, the E100S large diaphragm supercardioid condenser has the lowest noise floor in its class (3.7 dBA) and the smooth, vintage tone and robust low end CAD is known for. The bootstrapped, full differential Quadra-FET front end delivers high sensitivity and low distortion, plus CAD's proprietary circuitry ensures the highest performance.
The nickel plated 1 inch capsule delivers accurate phasing on instruments, and a full rich vocal tone, accentuated by the extended low frequency response. Features include an 80Hz hi-pass filter and a 10dB pad.
From vocals to percussion, acoustic instruments and everything in between, the CAD Equitek E100S will prove to be one of the most versatile tools in your microphone locker, in the studio or on stage. Vintage wood grain cherry case and stealth shock mount included.
E100S Specifications
- Operating Principle: Condenser
- Polar Pattern: Supercardioid
- Frequency Response: < 40Hz - 18KHz
- Sensitivity: - 30dBV (28mV) @ 1Pa; Impedance: 150 Ohms
- Max SPL: 150dB (Pad engaged); Self Noise: 3.7dBA
- Hi-Pass: 80Hz
- Attenuator: 10dB
- Power Requirements: P48V Phantom Power
E70
Modular Dual-Capsule Condenser Microphone with 3-Position High Pass Filter and 3-Position Pad
Packaged in a small, rugged metal housing, the Equitek E70 condenser microphone provides transparent, accurate acoustic capture. The low mass 1/2" gold sputtered diaphragm makes the e70 the preferred choice for high frequency sources rich in transients such as cymbal, hi-hat, strings, acoustic guitar, woodwinds and piano. The transformerless design reduces low frequency distortion at high sound pressure levels.
The 3 position hi-pass filter and 3 position pad provide the versatility required in demanding live sound and studio applications. The interchangeable capsules provide both cardioid and omnidirectional pickup patterns for greater flexibility. The E70's accuracy, high SPL capability and size make it a valuable tool in the professional audio environment.
E70 Specifications
- Frequency Response: 20Hz - 20KHz; Impedance: 85 Ohms
- Sensitivity (Cardioid): -40dBV (10mV) @ 1 Pa
- Self Noise (Cardioid): 23dB, A-weighted
- Maximum SPL (Cardioid): 155dB, 20dB pad engaged
- Sensitivity (Omnidirectional): -36dBV (16mV) @1 Pa
- Self Noise (Omnidirectional): 19dB, A-weighted
- Maximum SPL (Omnidirectional): 154dB, 20dB pad engaged
- Power Requirements: Phantom P48, 2mA
M179
Large Diaphragm Variable Polar Pattern Condenser Microphone
The M179 combines a vintage design with advanced electronics, featuring the dual pattern version of the original Equitek E300 capsule, an externally biased capsule with a gold sputtered 1.1" diaphragm.
Typical FET (field effect transistor) condenser microphones use discrete designs. This means they use individual transistors that must be carefully matched for proper characteristics. Even with careful matching, discrete designs are inherently nonlinear. The M179 uses a different approach, without any discrete FETs. Instead, CAD uses advanced high speed OpAmps (Operational Amplifiers). These OpAmps are individually laser trimmed for optimum performance and have very high gain. This allows a large amount of negative feedback to be used to significantly reduce any non-linearity. They also integrated a new discrete high efficiency power supply circuit allowing greater dynamic range and lower self noise.
The CAD M179 combines an advanced headamp design, with extremely efficient power circuitry, and a vintage capsule design, resulting in superior transient response, low distortion, low noise, and high output level. The bottom line is CAD believes you will find the M179 to have a remarkably open and clean sound that will enhance any project.
M179 Specifications
- Frequency Response: 10Hz - 20kHz
- Polar Pattern: Variable
- Impedance: 200 Ohms; Sensitivity:-36 dBV (16mV) @ 1Pa
- Equivalent Noise Level: 11 dB-A
- Maximum SPL: 143 dB SPL (with pad)
- Total Harmonic Distortion: Less than 0.15%
- Switches: High-pass filter, 20dB pad; High-Pass Filter: 100Hz, 6dB/octave
- Powering: Minimum requirements are 24-52V phantom power capable of delivering at least 8 mA
Product Description
CAD Audio M179 Variable Pattern Condenser Microphone
CAD Audio M179 Variable-pattern Condenser Microphone
The CAD Audio M-179 combines a vintage capsule design with advanced electronics. Designed for professional recording and broadcast applications.
CAD Audio M179. Perfect for stage or studio.The CAD M179 incorporates a number of unique features:
- Continuously variable pattern with a "hard" cardioid center detent
- Large 1.1" dual diaphragm external bias condenser capsule
- Gold sputtered diaphragms
- High SPL capability (143 db SPL with pad)
- Transformerless balanced output circuits
- 20 dB non-capacitive pad
- 6dB/Octave @ 100Hz high-pass filter
- Stainless steel internal pop/EMI filter
M179—A great microphone for a large number of uses.
The CAD Audio M179 can be used in a broad number of applications ranging from live reinforcement to the most critical studio applications
The M179 is ideal for vocals and voice overs, yet it also excels at some of the most demanding instrument projects. The M179 is great for virtually all acoustic, wind, and amplified instruments. It has been proven to be outstanding in all of these applications and more. Its uncolored sonic characteristics allow you to decide how an instrument or vocal will sound in the mix.
CAD Audio M179 Variable Pattern Switch Functions
The pattern control knob on the M179 has a center detented cardioid position. This allows the user to quickly and consistently lock the microphone in a "hard" cardioid pattern. By turning the know clockwise from the center, the pattern varies continuously from cardioid to subcardioid through omnidirectional. By turning the knob counterclockwise from the center, the pattern varies continuously from cardioid to hypercardioid through bidirectional. This allows the user to adjust to the optimal pattern needed for almost any recording or live situation.
The CAD Audio M179 Microphone offers many features normally found in only the most expensive microphones. With the M179, you get these features at a very affordable price.
Clісk Hеrе : ➤➤
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut CAD Audio CAD M179 Variable-Pattern Condenser Microphone (M179)Thе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 75% fоr реорlе whо buу CAD Audio CAD M179 Variable-Pattern Condenser Microphone (M179) рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "CAD Audio CAD M179 Variable-Pattern Condenser Microphone (M179)"
Post a Comment